HDPE Electric Fusion Direct Steel Wire Mesh Skeleton Pipe Electric Fusion Sleeve PE
----------------------------------------
Basic Info.
Electrofusion pipe fittings are plastic (polyethylene) pipe fittings that can be melted to reach the connection by the temperature generated by the current. Capacity (that is, the ampere number) is the main parameter. In some low-voltage circuits, the voltage requirement is not high, and only the ampere number is enough.
Outer Diameter
DN (mm) | SDR 9
PN20 | SDR 11
PN16 | SDR 13.6
PN12.5 | SDR 17
PN10 | SDR21
PN8 | SDR26
PN6 |
| | Wall Thick Ness(mm) |
| 20 | 2.3 | 2.3 | | | | |
| 25 | 3 | 2.3 | 2.3 | | | |
| 32 | 3.6 | 3 | 2.4 | | | |
| 40 | 4.5 | 3.7 | 3 | 2.4 | | |
| 50 | 5.6 | 4.6 | 3.7 | 3 | | |
| 63 | 7.1 | 5.8 | 4.7 | 3.8 | | |
| 75 | 8.4 | 6.8 | 5.6 | 4.5 | | |
| 90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | |
| 110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 |
| 125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 |
| 140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 |
| 160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 |
| 180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 |
| 200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 |
| 225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 |
| 250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 |
| 280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 |
| 315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 |
| 355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 |
| 400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 |
| 450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 |
| 500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 |
| 560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 |
| 630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 |
| 710 | | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 |
| 800 | | 72.7 | 58.8 | 47.4 | 38.1 | 30.6 |
| 900 | | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 |
| 1000 | | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 |
| 1200 | | | 88.2 | 67.9 | 57.2 | 45.9 |
| 1400 | | | 102.9 | 82.4 | 66.7 | 53.5 |
| 1500 | | | 110.2 | 88.2 | 71.4 | 57.6 |
| 1600 | | | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
In the sales and application of polyethylene piping systems, about 15% to 20% of the sales are pipe fittings. The pipe fittings of the polyethylene piping system are mainly divided into two types: hot-melt pipe fittings and electro-fusion pipe fittings. They are used in engineering due to price reasons. The consumption of medium hot melt pipe fittings is more than that of electric fusion pipe fittings, but electric fusion pipe fittings have an important and irreplaceable role in engineering and maintenance. Especially in construction, electric fusion pipe fittings are less affected by the external environment and human factors, so The reliability is better, and it is more popular with users. Especially in the gas pipe engineering, more and more electric fusion pipe fittings are being used. At the same time, due to the complex production technology, high cost, and high sales price of fused pipe fittings, the profit margin of the fused pipe fittings production plant is also high, which has become a hot spot for investment.
At the same time, because the matrix of the electrofusion pipe is made of PE material, the PE piping system composed of PE pipes solves the two major problems of traditional pipelines: corrosion and joint leakage. Its advantages are mainly embodied as follows:
(1) Corrosion resistance: long service life;
(2) No leakage at the joint: using electrofusion pipe fittings to connect, essentially ensuring the identity of the interface material and structure of the PE piping system and the pipe body itself. The integration of joints and pipes;
(3) It can effectively resist underground movement and end load: After the PE piping system is connected by welding, the joints based on this method are resistant to end loads, and joint leakage will not occur. At the same time, the stress relaxation characteristics of PE can effectively dissipate stress through deformation. Therefore, in most cases, expensive anchoring is not required at joints and bends. In addition, based on its high toughness, the elongation at break generally exceeds 500%, and the PE piping system has a very strong adaptability to the uneven settlement of the pipe foundation.
Details
Application
It is widely used in the fields of gas transportation, water supply, sewage discharge, agricultural irrigation, oil fields, mining, chemical industry, post and telecommunications.
Certificate
Company Profile
High Mountain Pipe has passed ISO 9001, ISO 14001, OHSAS 18001 management system certification and China environmental labeling product certification. The company is applying for CQC (China Quality) certification and CNAS (China National Accreditation Service for Conformity Assessment) national laboratory qualification accreditation. The company adheres to the business philosophy of "integrity, modesty, and a long history"
Long-term stock products: FRPP pipes, HDPE pipes, PP pipes, PPH pipes, PP boards, PE boards, UHMWPE boards and all pipe fittings.Pipes and plates with special quality requirements and colors, large quantities can be customized according to customer requirements and colors.
FAQ
Q: Is the price on this page correct?
A: The listed prices are for reference only, please contact us directly for the latest prices.
Q: What is the purpose of this pipeline?
A: It is mainly used to transport liquids, and is used on a large scale in urban water supply projects, farmland irrigation, etc.
Q: What are raw materials?
A: PE
Product Tags:
|
|
HDPE Black Electrofusion Pipe Fittings For Steel Wire Mesh Skeleton Pipe Images
|
